Skip to content

B.I.G. Full Suspension Mountain Bike Geometry - 2027 model

Frame Size 520R 29er  545R 29er 520R 32er 545R 32er
Rider Height Recommended 6'3" -6'10" 6'4"-7'2" 6'3"-6'10" 6'4"-7'2"
Effective Top Tube length 670mm 700mm 670mm 700mm
HT length 160 178 160 178
BB height - 4" travel 340 340 350 350
BB height - 5" travel 350 350 360 360
BB height - 6" travel 360 360 not available not available
HTA - 4" travel 67 deg 67 deg 65.5 65.5
HTA - 5" travel 66.5deg 66.5 deg 65 65
HTA - 6" travel 64 deg 64 deg not available not available
Seat Tube Angle 78 deg 78 deg 76.5 deg 76.5 deg
Seat Tube Length 533 560 533 560
Seatpost insertion 305 330 305 330
Chainstay length 450 450 470 470
Wheelbase 1310 1340 TBD TBD
Standover Height 828 840 840 850
Frame Stack 665 700 662 690
Frame Reach 520 545 520 545
Crank Length Recommended range 175-200mm 175-200mm 175-200mm 175-200mm
Handlebar Width 800mm 800mm 800mm 800mm
Max Tire size 29x3.0" 29x3.0 32x2.4" 32x2.4"

B.I.G. Full Suspension Mountain Bike Geometry - 2019 to 2025 models

Frame Size 2XL/3XL 29er  4XL/5XL 29er 2XL/3XL 32er 4XL/5XL 32er
Rider Height  6'3" -6'7" 6'8"-7' 6'4"-6'9" 6'9"-7'2"
Effective Top Tube length 680mm 704mm 680mm 704mm
HT length 178 178 178 178
BB height - 4" travel 335 335 345 345
BB height - 5" travel 345 345 not available not available
BB height - 6" travel 355 355 not available not available
HTA - 4" travel 66 deg 66 deg 63.5 63.5
HTA - 5" travel 65 deg 65 deg not available not available
HTA - 6" travel 64 deg 64 deg not available not available
Seat Tube Angle 75 deg 75 deg 74 deg 74 deg
Seat Tube Length 557 584 557 584
Seatpost insertion 305 310 305 310
Chainstay length 460 460 473 473
Wheelbase 1300 1325 1325 1350
Standover Height 828 840 840 850
Frame Stack 665 670 665 682
Frame Reach 475 500 475 500
Crank Length 180-210mm 180-210mm 180-210mm 180-210mm
Handlebar Width 800mm 800mm 800mm 800mm
Max Tire size 29x3.0" 29x3.0 32x2.4" 32x2.4"

*Stack and Reach numbers cannot be directly compared with other brands due to the higher bottom bracket we use for proportional crank length. Our stack and reach numbers will be a little shorter than they would be if we designed the bikes for standard crank lengths.